BEST QUALITY CUSTOM HAND MADE DAMASCUS STEEL folding KNIFE HANDLE camel bone, bullhorn olive wood. These unique superb design folding KNIFE are fully HAND MADE KNIFE are a piece of Craftsmanship and Exotic material, Blade of the knives are hand forged with above 216 Layers of 1095 and 15N20 high carbon tool steels, with Nickle layer. Blade has been given excellent heat treatment to get a 56 to 57 HRC. Blade has a razor sharp. LEATHER SHEETS ARE VERY GOOD QUALITY AND OF THICK LEATHER. SIZE& MEASUREMENT:- KNIFE OVERALL SIZE ARE 8.5 INCHES aprox, BLADE LENGTH 4.00 INCH aprox, AND HANDLE LENGTH IS 4.5INCHES. Knives are new and never carried or used before. PAY PAL PAYMENTS ONLY. WE DON’T SELL KNIVES TO ANY ONE WHO IS UNDER AGE 18. The item “DAMASCUS custom hand made lot of 3 damascuss folding knives” is in sale since Monday, November 13, 2017. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “blacksmith786″ and is located in Laval, Quebec. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
- Brand: BLACKSMITH786
- Type: Pocketknife
- Handle Material: CAMEL BONE+OLIVE WOOD+HORN
- Blade Material: Damascus Steel
- Blade Edge: Plain
- Blade Range: 4 INCHES
- Lock Type: Liner
- Country/Region of Manufacture: Pakistan
- Blade Type: Straight Back
Were often forged with different profiles, different blade thicknesses, and varying amounts of grind. The forging of a Japanese blade typically took weeks or even months and was considered a sacred art. As with many complex endeavors, rather than a single craftsman, several artists were involved. There was a smith to forge the rough shape, often a second smith (apprentice) to fold the metal, a specialist polisher (called a togi) as well as the various artisans that made the various fittings used to decorate the finished blade and saya (sheath). It is said that the sharpening and polishing process takes just as long as the forging of the blade itself. After the blade is finished it is passed on to a mountings-maker, or sayashi. The obvious part of the hilt consists of a metal or wooden grip called a tsuka , which can also be used to refer to the entire hilt. The hand guard, or tsuba , on Japanese swords is small and round, made of metal or alloy, and often very ornate. There is a pommel at the base known as a kashira , and there is often a decoration under the braided wrappings called a menuki. A bamboo peg called a mekugi is slipped through the tsuka and through the tang of the blade, using the hole called a mekugi-ana (“peg hole”) drilled in it. This anchors the blade securely into the hilt. To anchor the blade securely into the sheath it will soon have, the blade acquires a collar, or habaki , which extends an inch or so past the hand guard and keeps the blade from rattling. The saya is decorative or battle-worthy sheath. Item number: 701 Blade thickness:0.7cm/0.28inch. Tsuba :alloy Blade width:3.2cm/1.26inch. Bo-hi:Yes Blade length:70cm/27.6inch. Hamon: No Overall length: 103cm/40.6inch. Tang: Full tang Saya (scabbard):Red and black crack wood saya. Other fittings:brass habaki&high-grade brass seppa+alloy fuchi & kashira+white silk sageo. Handle(tsuka):26cm/10.24inch, hard wood Wrapped with white imitated rayskin &coffee cotton cord &ornamented with alloy menuki. The stand is only for display, not included in the package, please understand us, thank you very much! Ustomize your own sword. All our standard blades are available with customizable parts, where you can choose from a large array of fittings, Ito, Sageo and Saya. It is free to choose following parts instead the original ones! Please contact me at first, sword will be made according to your required. If you don’t like the original mountings, you can choose the favorite ones from the options. Handle wrapping cord and saya cord should be the same color. If you only want to change one of them to another color, please inform of it specially. Longquan is the original place of treasured swords and celadon (ware). It is famous home and abroad for the production of Longquan swords. On the base of 2600 years’traditional sword culture of Longquan, our company inherited and are developing the ancestral sword-forging craft, absorbed the merit of other colleagues, and choose best material to forge the swords by over 20 working procedures such as hammering, shoveling, filing, engraving, quenching, polishing, etc. It is famous for the distinguishing features “tenacious and sharp, couple hardness with softness, threatening shiny blade, exquisite patterns and fittings”. Thanks for high expectations and support from our customers. We will never disappoint any sword-lover and our customers. Meanwhile, we strive to make every sword to be excellent with renewed efforts, making perfection more perfect, and meet all customers’satisfactions. We will try our best to offer you a satisfactory solution. Item number: 701 Overall length: 103cm/40.6inch Blade length:70cm/27.6inch Blade thickness:0.7cm/0.28inch Blade width:3.2cm/1.26inch Blade material :Carbon steel. Folded steel Tsuba :alloy Bo-hi:Yes Hamon: No Tang: Full tang Saya (scabbard):Red and black crack wood saya Other fittings:brass habaki&high-grade brass seppa+alloy fuchi & kashira+white silk sageo Handle(tsuka):26cm/10.24inch, hard wood Wrapped with white imitated rayskin &coffee cotton cord &ornamented with alloy menuki Folded Steel: The steel we use with the blade is the high carbon steel folding by 11 times, creating with 2048 layers;In a certain range, the purity of the steel will be higher with the increase of the folding times. The item “Damascus Folded steel Japanese katana samurai Warrior Real sword sharp knives” is in sale since Friday, August 25, 2017. This item is in the category “Collectables\Knives, Swords & Blades\Swords & Sabres\Asian\Japanese”. The seller is “samurai-x2014″ and is located in Longquan, Zhejiang. This item can be shipped worldwide.
- Country/Region of Manufacture: China
- Overall Length: 103cm/40.6″
- Blade length: 70cm/27.6″
- Handle Length: 26cm/10.24inch
- Tang: Full
- Menuki: Alloy
- Tsuba: Alloy
- segeo: synthetic silk
- Blade width: 3.2cm/1.26″
- Blade thickness: 0.7cm/0.28″
- Fuchi&Kashira: Alloy
- Habaki&Seppa: Brass
- Saya: Hard wood
- Ito: synthetic silk
- Brand: unbranded
- MPN: Does not apply
- Type: Katana
- Handle Material: Cord Wrapped
- Dexterity: Right-Handed
- Edge: Single
- Handedness: Single-Handed
- Era: 2000s
- Blade Material: Folded Steel
Damascus Folding knife days, OVER ALL LENGTH 19 cm HANDLE LENGTH 10 cm BLADE LENGTH 09 cm BLADE THICKNESS 3mm approximately BLADE HARDNESS 58-60 HRC Which Holds The Sharp Edge For Long Time. PATTERN Twist THE HANDEL Handle made of , Buffalo horn Camel Bone, Ebony wood, Olive wood , Multi wood and Brass Bolster, This Custom Handmade Product Has a Nice Hand Forged With the Combination of 15N20 and 1095 Carbon Steel All our Products are Handmade and Unique CARE / TIPS Blade of Product Should Always Be Clean and Treated With Oil After Every Use. THANK YOU VERY MUCH FOR TAKING INTEREST IN OUR PRODUCTS. The item “Lot of (40) Damascus Laguiole folding knife for Retailers RK-4061″ is in sale since Thursday, October 05, 2017. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Factory Manufactured”. The seller is “rajputknives2014″ and is located in wazirabad, Punjab,Pakistan. This item can be shipped worldwide.
- Brand: Rk
- Country/Region of Manufacture: Pakistan
- Blade Material: Damascus steel
- Blade Range: 09 cm
3.75 Polar Ice folding knife under Cool Hand Brand , CNC machined contoured carbon fiber handle. 67 layer VG10 Damascus blade , 59 HRC hardness. Tip Down Style Pocket clip and lanyard hole make it flexible for different personal carrying preference. Gift box packing make this knife a cool gift to the one you love. Net weight:1.7 OZ48g ;Package: 4.2 OZ120g. Overall Length: 6.5″; Handle Length:3.75″; Blade Length:2.75″, Blade Thickness: 0.087″. No questions, no condition, just let us know reason for return to help us improve our service to customers. 1 x Knife with Gift Box. The item “2.75 Damascus Blade Folding knife Carbon Fiber Handle COOL HAND, E, 6102CFO-11D” is in sale since Wednesday, May 11, 2016. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Factory Manufactured”. The seller is “ezpeachy” and is located in Bellevue, Washington. This item can be shipped to United States.
- Brand: Cool Hand
- Type: Folding Knife
- Handle Material: Carbon Fiber
- Blade Material: VG10 Damascus
- Dexterity: Ambidextrous
- Number of Blades: 1
- Blade Edge: Plain
- Blade Range: Under 2.75in.
ONE OF KIND HAND-MADE FULL DAMASCUS STEEL POCKET FOLDING KNIVES Damascus 3.5 Blade Custom Folding knife w/Steel Engraved Handle, Clip, File-Work, Liner Lock & Sheath cover F-K-101-4. 512 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC MEASUREMENTS : BLADE LENGTH 3.5″ HANDLE LENGTH 4.5″ TOTAL LENGTH 8.0 Handle material : Steel, Brass Engraved Handle. Sheath: A fine Custom Made sheath is Included Pattern: Wind & twist pattern, File-work Weight 270 g. Blade Layers & Hardness : Over 350 Layers, 15N20 & 1095 Damascus Mixture of steel and high, low Carbon and HRC approximately 56 to 58. The knife blade is 100% forged and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Engraving: Engraving adds a decorative element to a bolster or guard. Engraving is another way to make a knife handle look spectacular. Each knife has unique style of engraving on the bolsters. Most of our knives are one-of-a-kind Hand made. Please refer to the pictures. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. The item “Damascus 3.5 Blade Custom Folding knife withLock, Steel Engraved Handle UDK-F-101″ is in sale since Thursday, June 30, 2016. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “apchem01″ and is located in Kennesaw, Georgia. This item can be shipped to United States.
Damascus Blade Folding Knife, 3.75″ Carbon Fiber Handle, 2.75″ Blade, S, 6102CFO-11D. 67 layer VG10 Damascus blade damascus blade, strong toughness and corrosion resistance. CNC machined carbon fiber handle, lighter and harder with higher and tensile strength. Dual thumb studs design for both right-handed and left-handed users. Tip Down Style Pocket clip and lanyard hole make it flexible for different personal carrying preference. Gift box packing make this knife a cool gift to the one you love. Overall Length: 6.5(184MM). Handle Length: 3.75”(106MM). Blade length: 2.75″ (78mm); Blade Thickness: 0.087″ (2.2MM). Net weight: 1.7 OZ (48g) ; Package: 4.2 OZ (120g). Locking type: Liner lock. No questions, no condition, just let us know reason for return to help us improve our service to customers. The item “Damascus Blade Folding Knife 3.75 Carbon Fiber Handle 2.75 Blade, E, 6102CFO-11D” is in sale since Friday, June 24, 2016. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Factory Manufactured”. The seller is “ez-grips” and is located in Traverse City, Michigan. This item can be shipped to United States.
- Brand: COOL HAND
- Type: Pocketknife
- Handle Material: Carbon Fiber
- Blade Edge: Plain
- Dexterity: Ambidextrous
- Number of Blades: 1
- Blade Material: Damascus Steel
- Blade Type: Drop Point
- Lock Type: Liner
- Blade Range: Under 2.75in.
- Opening Mechanism: Manual
