ONE OF KIND SMALL HAND-MADE DAMASCUS STEEL POCKET FOLDING KNIVES. Titanium Coated Damascus Blade custom Folding Knife. W/Liner Lock, Custom File-work. Pocket Clip, Poly Risen Handle & Custom Made Sheath US-CH-76. 256 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC. BLADE LENGTH 3.5. HANDLE LENGTH 4.8. TOTAL LENGTH: 8.3 app. TOTAL WEIGHT 185 g. Sheath: Knife Comes with a fine Custom made sheath made from Camel, cow Skin and a Microfiber Pouch. Pattern: Wind & Mix twist pattern, Custom made Extreme File-Work. Blade Layers & Hardness: Over 250 Layers, 15N20 & 1095 Damascus Mixture of steel and high Carbon Steel and HRC approximately 58 to 60. The knife blade is 100% hand forged Coated with the layers of Titanium and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “damascussharpknife” and is located in this country: US. This item can be shipped to United States, Canada, Australia, Bahamas, Mexico, New Zealand, Brazil, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, Honduras, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Uruguay.
ONE OF KIND SMALL HAND-MADE DAMASCUS STEEL POCKET FOLDING KNIVES. Titanium Coated Damascus Blade custom Folding Knife. W/Liner Lock, Custom File-work. Pocket Clip & Custom Made Sheath US-CH-100. 256 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC. BLADE LENGTH 3.3. HANDLE LENGTH 4.4. TOTAL LENGTH: 7.7 app. TOTAL WEIGHT 150 g. Sheath: Knife Comes with a fine Custom made sheath made from Camel, cow Skin and a Microfiber Pouch. Pattern: Wind & Mix twist pattern, Custom made Extreme File-Work. Blade Layers & Hardness: Over 250 Layers, 15N20 & 1095 Damascus Mixture of steel and high Carbon Steel and HRC approximately 58 to 60. The knife blade is 100% hand forged Coated with the layers of Titanium and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “damascussharpknife” and is located in this country: US. This item can be shipped to United States, Canada, Australia, Bahamas, Mexico, New Zealand, Brazil, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, Honduras, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Uruguay.
3.5″ Titanium Coated Damascus Blade Custom Folding Knife w/ File-Work, Liner Lock, Pocket clip & Sheath UDK-CH-74 – 256 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC MEASUREMENTS : BLADE LENGTH 3.5″ HANDLE LENGTH 4.8″ TOTAL LENGTH 8.3″ Weight 190 g Sheath: Knife Comes with a fine Custom made sheath made from Camel, Cow Skin Pattern: Rainbow Titanium Coated Damascus Wind & Mix twist Fire pattern Blade. ONE OF KIND SMALL HAND-MADE DAMASCUS STEEL POCKET FOLDING KNIVES. Sheath: Knife Comes with a fine Custom made sheath made from Camel, cow Skin and a Microfiber Pouch. Pattern: Wind & Mix twist pattern, Custom made Extreme File-Work. Blade Layers & Hardness: Over 250 Layers, 15N20 & 1095 Damascus Mixture of steel and high Carbon Steel and HRC approximately 58 to 60. The knife blade is 100% hand forged Coated with the layers of Titanium and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “damascussharpknife” and is located in this country: US. This item can be shipped to United States, Canada, Australia, Bahamas, Mexico, New Zealand, Brazil, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, Honduras, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Uruguay.
ONE OF KIND SMALL HAND-MADE DAMASCUS STEEL POCKET FOLDING KNIVES. 3.8″ Titanium Coated Damascus Blade Custom Folding Knife w/ File-Work, Liner Lock, Pocket clip, Damascus Handle & Sheath UDK-CH-73 – 256 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC MEASUREMENTS : BLADE LENGTH 3.8″ HANDLE LENGTH 4.8″ TOTAL LENGTH 8.6″ Weight 270 g. Sheath: Knife Comes with a fine Custom made sheath made from Camel, cow Skin and a Microfiber Pouch. Pattern: Wind & Mix twist pattern, Custom made Extreme File-Work. Blade Layers & Hardness: Over 250 Layers, 15N20 & 1095 Damascus Mixture of steel and high Carbon Steel and HRC approximately 58 to 60. The knife blade is 100% hand forged Coated with the layers of Titanium and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “damascussharpknife” and is located in this country: US. This item can be shipped to United States, Canada, Australia, Bahamas, Mexico, New Zealand, Brazil, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, Honduras, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Uruguay.
ONE OF KIND SMALL HAND-MADE DAMASCUS STEEL POCKET FOLDING KNIVES. Titanium Coated Damascus Blade custom Folding Knife. W/Liner Lock, Custom File-work. Pocket Clip, poly risen Handle & Custom Made Sheath US-CH-18. 256 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC. BLADE LENGTH 2.5. HANDLE LENGTH 3.4. TOTAL LENGTH: 5.9 app. TOTAL WEIGHT 105 g. Sheath: Knife Comes with a fine Custom made sheath made from Camel, cow Skin and a Microfiber Pouch. Pattern: Wind & Mix twist pattern, Custom made Extreme File-Work. Blade Layers & Hardness: Over 250 Layers, 15N20 & 1095 Damascus Mixture of steel and high Carbon Steel and HRC approximately 58 to 60. The knife blade is 100% hand forged Coated with the layers of Titanium and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “damascussharpknife” and is located in this country: US. This item can be shipped to United States, Canada, Australia, Bahamas, Mexico, New Zealand, Brazil, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, Honduras, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bermuda, Bolivia, Ecuador, French Guiana, Guadeloupe, Cayman Islands, Martinique, Nicaragua, Peru, Paraguay, Uruguay.
ONE OF KIND SMALL HAND-MADE DAMASCUS STEEL POCKET FOLDING KNIVES. Titanium Coated Damascus Blade custom Folding Knife. W/Liner Lock, Custom File-work. Pocket Clip, mother of pearl Handle & Custom Made Sheath US-CH-77. 256 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC. BLADE LENGTH 2.5. HANDLE LENGTH 3.4. TOTAL LENGTH: 5.9 app. TOTAL WEIGHT 105 g. Sheath: Knife Comes with a fine Custom made sheath made from Camel, cow Skin and a Microfiber Pouch. Pattern: Wind & Mix twist pattern, Custom made Extreme File-Work. Blade Layers & Hardness: Over 250 Layers, 15N20 & 1095 Damascus Mixture of steel and high Carbon Steel and HRC approximately 58 to 60. The knife blade is 100% hand forged Coated with the layers of Titanium and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. The item “3.2 Titanium Coated Damascus Blade Custom Folding Knife with Pearl, Clip-US-77″ is in sale since Thursday, April 1, 2021. This item is in the category “Collectibles\Knives, Swords & Blades\Collectible Folding Knives\Modern Folding Knives\Custom & Handmade”. The seller is “damascussharpknife” and is located in Kennesaw, Georgia. This item can be shipped to United States, Canada, Australia, Bahamas, Mexico, New Zealand, Brazil, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, Honduras, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bermuda, Bolivia, Ecuador, French guiana, Guadeloupe, Cayman islands, Martinique, Nicaragua, Peru, Paraguay, Uruguay.
3.4 Coated Titanium. Blade Custom made Folding. Knife w/ Liner Lock, Custom File-work, Brass Bolsters, Linen Micarta. & Custom Sheath UDK-223. 256 Layer (1095/15N20) Steel Blade Oil Tempered to 58-60 HRC. BLADE LENGTH 3.4. TOTAL LENGTH: 8.0 app. Sheath: A fine Custom Made sheath is Included made from Camel and cow Skin. Pattern: Titanium Coated Wind & Mix twist pattern, File-Work. Handle Material: Brass bolsters, Linen Micarta. Blade Layers & Hardness : Over 250 Layers, 15N20 & 1095 Damascus Mixture of steel and high Carbon Steel and HRC approximately 58 to 60. Heat Treated Titanium Coated Damascus knife blade is 100% hand forged and is the results of hours of work. The Damascus steel used for this knife was created by forge welding multiple layers of 15N20 & 1095 steel into a solid billet. Thank you for the cooperation. We do not sell knives to anyone who is under age 18. The item “3.4 Titanium Coated Damascus Blade Folding Knife withFine Lenin Micarta-UDK-223″ is in sale since Thursday, May 10, 2018. This item is in the category “Home & Garden\Kitchen, Dining & Bar\Flatware, Knives & Cutlery\Kitchen & Steak Knives”. The seller is “apchem01″ and is located in Georgia. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Lithuania, Malta, Greece, Portugal, Cyprus, Slovenia, Sweden, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Mexico, Switzerland, Ukraine, Brazil, Chile, Colombia, Uruguay.
