Civivi Knife Amirite Ultem Bead Blasted, Damascus (C23028-DS1). Amirite Ultem Bead Blasted, Damascus excellent EDC folding knife. Blade made of damascus with a unique design, opened by gravity, with a pin in the blade or with a quick Flipper. The perfect everyday companion! Civivi – a sub-brand of WE Knife, a company producing knives of the highest world quality. Production is carried out on the same production lines as WE, so the highest standard of assembly is maintained. Damascus – Damascus stainless steel blade with a unique pattern. The blade, consisting of two different types of steel, was forged and assembled together in different ways obtaining this amazing pattern. It is characterized by high hardness in the range of 58-60 HRC. Blade – Modified Wharncliffe type finished with etching that highlights the unique damascus patterns. The small thickness of the blade combined with a high flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearing ceramic supports the smooth operation of the blade’s opening mechanism, which can be opened by gravity with a release button on one of the Handle, a double-sided pin in the blade, or with a quick flipper flipper (index-finger flipper). When opened, the flipper forms a mini-guard to prevent the hand from slipping on the blade. On the back of the upper jimping wedge, a notched thumb rest. The entire blade is locked with a solid button lock. Under the lock button there is a resisting spring, which prevents accidental release of the lock. ULTEMT – a plastic belonging to the family of Polyethermoids or simply PEI. This material is characterized primarily by high mechanical and impact strength with a very high strength-to-weight ratio. It is also characterized by high thermal resistance (180? C) and high chemical resistance to all kinds of solvents (synthetic and natural), lubricants or other chemicals. Adding to this total insensitivity to weather conditions, we get an ideal material for knife handles. Handle – grips made of sandblasted, transparent UltemT plastic, which were screwed to steel liners. Chamfered edges of the liners eliminate sharp edges for a comfortable and secure grip. An open-backed design attached with steel spacer sleeves reduces weight and facilitates cleaning. The pivot axis is decorated with a stylized Civivi brand logo. A two-position, right/left deep carry clip allows you to carry the knife discreetly in your pocket in tip-up position (blade tip up). Case – the knife is packed in a zippered soft nylon case with the brand’s logo. It is used for safe storage and transportation of the folder. Technical data: Product number: C23028-DS1 Product name: Amirite Ultem Bead Blasted, Damascus. Overall length: 213.5 mm / 7.88″ Blade length: 88.3 mm / 3.48″ Blade thickness: 3.0 mm / 0.12″ Handle length: 125.2 mm / 4.93″ Handle thickness: 13.0 mm / 0.51 Weight: 120.1 g / 4.24 oz. Blade material: Damascus Blade hardness: 58-60 HRC Blade grind: Flat Blade Finish. Handle material: ULTEMT Handle finish color: Yellow, Bead Blasted Backspacer material: Stainless Steel Backspacer color: Gray. Clip: Right/Left, Tip-Up Clip material: Stainless Steel. Pivot mechanism: Caged Ceramic Ball Bearing. Locking mechanism: Button Lock Opening method: Manual, flipper, dual thumb stud Additional accessories: Pouch. Country of Origin: P. Developed by: the Sharg® company. We are not responsible for the product use or misuse. For most of the destinations this time is less than 14 days. Europe up to 14 days. Your feedback is important to us as is your satisfaction in shopping with us. The listing is automatically managed by IdoSell Shop, a system that takes extra care of listing only products that are actually in stock.
LOT of 50 PCS Damascus handmade back lock folding pocket knife camping outdoor rose Olive wood knife. Damascus steel pattern is created, when the blade is forged-welded, then it is further forge-welded, twisted, drilled, flattened, and grounded. After the stack of steel is shaped into a billet or bar, a knife is made from this billet or bar. To unveil the eye-catching design, the knife is profiled, ground, heat treated, and completed with extra procedures including etching and bluing. Blade is thoroughly honed and tempered. Blade Material: Damascus Steel. Blade Length: 3.0 inches. Handle Length: 3.5 inches. Lock Function: Back Lock. Handle Material: Rosewood + Olive wood With Brass Clips. File work: Brass work on the spine. Sharpness: Razor Sharp cutting edge Sheath: Genuine Cow Leather. Important Note : As all our knives are handmade, the knife you. Will receive may be slightly different from the stock photo, but it will be just as nice as what you see in the photo, with it’s own unique variations. Store in a dry place, dampness promotes rust. Damascus is very easy to clean if it is rusty, but it is resistant to rust. At times the steel of Damascus darkness with age. To brighten up the blade, sand it lengthwise with a worn piece of sandpaper, this hits the raised portion of the etched pattern & makes the edge look brighter. Our knife is lubricated before use please remove protective oil. After use, wash & dry the blade and apply vegetable oil or any lubricating oil(WD-40), if you face stiffness in opening and closing a knife, you may add a few drops of oil at the joint of the blade and handle to loosen it a bit. Do not keep the knife inside the leather sheath for long. We will try best to make you happy by any means. The knives are sharp and may cause injury pleas use it carefully. We will not be responsible to any injuries caused by improper misuse.
This Shortcut by Jeremy Krammes features a hand rub satin finished Nichols XHP Damascus blade with a thumbhole. The handle has bead blasted titanium bolsters, carbon fiber scales, bead blasted titanium liners, titanium tip up clip and a black G-10 backspacer. Nice detent, lockup and blade seating. Brand new, excellent condition. Comes with a Hardcase pictured. Not Benchmade, Spyderco, Null, Sparrow, Vero, Frank Fischer, Chris Reeves, Peter Carey.
Handcrafted Santa Fe Stoneworks Patriotic Red (Coral), White (Mother of Pearl) & Blue (Lapis) Damascus 3 Knife. I personally traveled to Santa Fe Stoneworks and handpicked the best they had to offer from their collection. This Patriotic design is Lapis, Coral, and Mother of Pearl with an inlaid mother of pearl star. What better way to pay tribute to our country! The photos don’t do it justice. The mother or pearl has depth and iridescent colors. It’s much nicer in person. Also available in a 3 red & 3 white stripes pattern, see Sellers other items for sale. Raindrop Damascus steel – Damascus steel is characterized by its strength, edge holding ability, and its dramatic appearance. The Damascus steel used in Santa Fe Stoneworks knives comes from Seki, Japan and is called “Sanmai Damascus” or. There is a core of high quality VG-10 super stainless steel with 16 layers of SUS410 high carbon stainless steel on each side to produce a rust free 33 layer Damascus layered blade. Santa Fe Stoneworks believes this is the highest quality Damascus steel. About Santa Fe Stoneworks – In the shadows of the Sangre de Cristo Mountains sets a century-old adobe ranch house where artisans handcraft art knives OF. From one-of-a-kind custom designs to popular, affordable collections of pocket knives, table and kitchen cutlery, gifts and accessories each Santa Fe Stoneworks collectible is a unique example if the cutler’s art – the quintessential marriage of fine steels with gemstones, shells or intricate marquetry. To wear the Santa Fe Stoneworks name, each piece has completed a journey of countless painstaking steps. An artistic journey we travel, some think, to perfection. Blue (Lapis), Red (Coral), White (Mother of Pearl) handle. Damascus VG 10 stainless steel blade. 5 3/8″ opened, 3″ closed, 2 1/4 blade. Includes magnetic gift box. Perfect gift, light enough for a ladies purse. From Santa Fe Stoneworks website. Covered items are any parts proven to be defective in material or workmanship. Specifically excluded are problems due to misuse or abuse. Santa Fe Stoneworks 3790 Cerrillos Road Santa Fe, NM 87505 Attn: Customer Service. Please also Include your. Note: This knife was designed to cut and NOT to be used as a heavy duty tool. How do I sharpen my knife? Use a good, medium/fine stone or steel, moistened with light oil. Be sure to maintain the same angle for each stroke (we recommend a 20° angle for a good, general-purpose edge). Count your honing strokes; then turn the blade over and hone with an equal number of strokes. Start strokes with heavy pressure, then ease off to a lighter pressure and finish with a light stroke – both sides. NOTE: Never use a power-driven grinding wheel to sharpen your knife. This can heat the blade to the point where its temper (a hardening process accomplished by heating and quenching) is damaged. How can I extend the useful life of my pocket knife? An occasional drop of oil on the moving parts of a knife will ensure easier opening and closing, prevent rust, and lessen wear. Avoid getting sand, grit, lint, or other foreign particles in the mechanism. Keep blades clean and dry, and wipe clean with an oil-moistened cloth to prevent rust.
